Internally Weighted | Tetherless Floats - K Series & R Series

These high quality float switches are designed for internally weighted | tetherless floats (available in pilot duty & pumps duty).

  • The floats have 3 power connection options:
    • Skived Ends Where the insulated wire leads inside the cable are intended to be wired into other system components inside a junction box.
    • 120 VAC Piggyback Plug Where no junction boxes or complicated electrical connections are needed. Plug the switch into a standard 120 VAC outlet, and plug your pump into the piggyback plug.
    • 240 VAC Piggyback Plug Where no junction boxes or complicated electrical connections are needed. Plug the switch into a standard 240 VAC outlet, and plug your pump into the piggyback plug.

Please see below for Ratings, Operating Angle, or Cord Type Options

  • Ratings ("K" Series):
    • 10 AMP @ 120/240 VAC
    • 1/4 H.P. @ 120/240 VAC
    • 34.8 LRA
  • Ratings ("R" Series):
    • 15 AMP @ 120/240 VAC (14 AWG Cord)
    • 13 AMP @ 120/240 VAC
    • 1/2 H.P. @ 120/240 VAC
    • 58.8 LRA
  • Operating Angle: Narrow Angle
    • "K" Series
      • Tetherless / Internally Weighted
      • Contacts close 25° above horizontal
      • Contacts open 10° below horizontal
    • "R" Series
      • Tetherless / Internally Weighted
      • Contacts close 25° (or before) above horizontal
      • Contacts open @ horizontal
  • Operation Options:
    • Normally Open (Pump Down)
    • Normally Closed (Pump Up)
    • Double Throw (SPDT)
  • Cord Options:
    • 18 AWG Black SJOW
    • 16 AWG Black SJOW
    • 16 Yellow SJOOW or SOOW
    • 14 AWG Black SJOOW
UL & CSA Markings

Possible Markings

Available in the Avocado Shaped float package.