MDI offers Free Shipping on online orders over $300
(Some Restrictions May Apply - Store Policies)

ABS Grinder Pump - 2HP - 115V - (20 gpm & 90 foot head) - Internal Start Components - Float Included

SKU: G2-11SI-ABS

Price: $1,560.99

The MDI ABS Retrofit grinder pumps easily handle residential, light commercial or industrial sanitary waste, reducing it to fine slurry. The ABS Retrofit pump is designed for use in pressure sewer applications or any piping network.

The recessed vortex impeller design of the ABS Retrofit grinder pump provides trouble free, non-overloading operation over the entire performance curve. The ABS Retrofit grinder pump produces capacities to 20 GPM with heads to 90 ’ .

The ABS Retrofit grinder grinder pump retrofits into many existing competitor pump installations. The ABS Retrofit grinder pump operates with the same control panel and installation piping/rail system.

  • Features
  • Performances
    • Heads Up to 90’ TDH
    • Flows Up to 20 GPM
  • Strong 2 HP Motor
    • 60 Hz Single-Phase
    • 19.5 AMPS @ 115 VAC
  • Internal Start Component (No Control Box Required)
  • Cord Length 30’ 12 AWG
  • Float Switch HF2OU30F1 (UL Listed & CSA)
  • Internal Moisture Detection
  • Potted Cord Cap Assembly
  • 3-Bearings Shaft Support
  • Pressed in Motor
  • Thermally Protected
  • 29.5 x 8.25 x 10.75
  • 1 Year Warranty

Spec Sheet
Pump Manual

Manufacturer: MDI Sewage Products

Weight: 104 lb

Delivery: Ships in 4-10 Business Days

ABS - G2 USA.png

Click to Enlarge
Grinder ABS
G2-11SI OT WD.png
MDI Pump Curve - G2-11S.
  • Features and Benefits
    1. Triple Sealed Cable Entrance
      • Stainless steel strain relief cord grip with compression grommet protects outer cord jacket
      • Epoxy filled inner cord cap with individually soldered wires provide anti-wicking moisture protection to the motor even if power cable is cut or damaged
    2. Modular Pump Design
      • Commonality of parts across the pump product line minimizes the amount of parts required for servicing
      • Heavy duty ASTM A48, Class 30 Cast-Iron components
    3. 3-Bearing Support
      • Motor/Pump shaft securely held with upper and lower ball bearing plus addition sleeve bearing in lower seal chamber
      • Long 50,000 hour B-10 bearing life
    4. Moisture Detection
      • Seal leak probe signals alarm in control panel for scheduled maintenance
    5. Non-Overloading Hydraulic Design
      • The recessed centrifugal impeller allows 100% performance curve operation from shut-off to maximum flow without damage to the pump or system
      • The recessed vortex impeller is out of the passageway of fluid flow, eliminating concerns of blockage or wear
    6. Proven Grinder Assembly
      • Hardened (Rockwell 56-60) stainless steel grinder assembly has 30+ years proven field experience
      • The reversible grinder ring and grinder impeller effectively reduces solids into a fine slurry, easily passable in a piping system without concerns of clogging
      • Highly efficient 16,600 cuts per second
    7. Easy Piping Connection
      • Made to drop right in!
  • Pump Data
  • Grinder Ring 8 Slots
  • Impeller Dia 5.50"
  • Impeller Vanes 12
  • Impeller Type Recessed Vortex
  • Motor Data
  • Start Capacitor 200 µFD @ 125 VAC
  • Run Capacitor 70 µFD @ 250 VAC
  • Rated Power 115 VAC 1-Phase
  • Starting Current 48 AMPS
  • Run Current 16.9 AMPS
  • Poles 2 Pole
  • Motor Speed 3450 RPM
  • Insulation Class F
Made in USA
Made in USA

MDI Inc. Our Company!

See all MDI Sewage Products
Mercury Displacement Industries Incorporated, better known in the industry we serve as MDI, was incorporated in Michigan in 1975. The primary product line is switch gear components including mercury type contactors, tilt switches and liquid level float controls.
Contactors are rated from 30 to 100 Amperes and are commonly used in various heating, lighting, and many other industrial applications including high voltage ultraviolet type loads. The contacts are encased in hermetically sealed stainless steel tubes to provide reliable switching for millions of operations. All basic units are UL, CSA, and CE approved.
The liquid level control floats are manufactured with mechanical or mercury switches. The float material is High Impact Polystyrene for normal alarm, sump pump or water applications, For sewage, 1 or 2 H.P. or high temperature, 86°C (186°F) requirements Acrylonitrile Butadiene Styrene, (ABS) float material is provided.
MDI has 40 to 50 employees and markets products through distributors, representatives or direct to OEM accounts throughout the world.

MDI Quality Policy
It is the policy of MDI to manufacture and market products of excellent quality, durability and reliability. This policy emphasizes the importance of product reputation and customer satisfaction in the success of our business. The MDI Team is committed without exception to the continuous improvement in quality and cost, and to manufacturing productivity and efficiency.

Since 1975
MDI Quality - Durability - Reliability

Call Us Toll Free: (800) 634-4077

Request More Info

Related Items